Yes, you can test the app you are building on your own Android phone and change it from there. In GrowApps, press Export, open the Google Play row, then press Install on my Android phone, and scan the code with your phone's camera. Android asks you to allow the install, and then your real app runs on your phone and updates as the agent builds it. A glass tab on the right edge of the app opens a chat with the agent, so you can ask for a change while you use the app, without opening GrowApps at all.

GrowApps is an AI app builder that writes real Flutter apps for the web, Android and iPhone from one project, with an agent that writes, runs and fixes the code. This guide covers the phone install as of November 2026: the steps, the chat inside your app, what it costs, the honest limits, and how other AI builders such as Replit, Rork and Bolt put an app on a phone.

Why test on your own phone and not only in the browser?

A browser preview shows you the layout. Your phone shows you the app: one hand, one thumb, a keyboard that covers half the screen and a small speaker. That is where "it looked fine on my laptop" problems appear.

The phone install gives you the real Android app, not a web page. For a quick look in the phone's browser, Scan to preview in the same Export pane still works, on iPhone too.

How do I install the app I am building on my Android phone?

You need GrowApps open on a computer and an Android phone with a camera.

  1. Open your app in GrowApps and press Export. Open the Google Play row and press Install on my Android phone.
  2. Wait for the build. A bar shows the steps: "Waking up your app's computer", "Getting your app ready", "Building the Android app" and "Connecting live updates", with the time left. The first build takes a few minutes. You can close the window; the build carries on.
  3. Scan the code. When the dialog says "Scan this with your phone's camera.", point your phone at the QR code. For safety the code works for 10 minutes. Retry makes a new one, and Copy link gives you the link if you prefer to send it to yourself.
  4. Allow the install. Your phone downloads your app. Android may ask you to allow installs from your browser. That is Android's normal prompt for apps that do not come from Google Play, described in Google's guide to installing unknown apps.
  5. Open the app. It connects to your project by itself. There is no cable, no developer mode and nothing to set up on the phone.

If you have GrowApps open on the phone itself, there is no code to scan. The same dialog shows an Install on this phone button instead.

What happens on the phone while the agent builds?

From now on the app on your phone follows your project. When the agent changes the code, it hot reloads your phone first and then the web preview, so the change shows up in your hand without a reinstall. A small note says "Your app was updated". Some changes restart the app instead of reloading it, which takes a little longer and starts it from its first screen.

The connection copes with short breaks. If you lose signal or switch on airplane mode, the app keeps running its last version and the chat shows Offline. When the network comes back, it reconnects and loads the latest code by itself.

How do I change my app from inside the app?

This is the part we like most. You do not need to go back to your computer, and you do not even need to open GrowApps.

  1. Find the tab. A small glass tab with the GrowApps leaf sits on the right edge of your app. Its hint reads "Ask for a change without leaving the app".
  2. Open the chat. Tap the tab, or swipe it to the left. A glass chat box opens over your app, with a text field that asks "What's next?".
  3. Ask for the change. Write what you want, in your own words. The chat shows what the agent is doing, such as "Editing the code" or "Hot reloading the app".
  4. Watch it update. When the agent is done, the box folds away and a note says "Your app was updated". Keep using the app and check the change.

When the agent needs a decision, the box opens by itself with "A question from GrowApps" and the choices it suggests. You can pick one, write your own answer, or press "You choose for me". A Stop button ends the agent's work if you change your mind. You can drag the box by its grip to see what is behind it, or tuck it into the tab.

Here is a typical loop. You are building a small arcade game and you play it on the bus. The jump feels slow and the coins are hard to see. You open the tab and write "make the jump snappier and the coins twice as big". When the note appears, you play again and feel the difference with your own thumb.

No signal on the way? Write anyway. Your message waits and goes out when the phone reconnects. It is the same agent and the same project as in the editor. For tips on wording a change, see our guide to building an app with AI.

What does it cost, and what are the limits?

Here is the full picture, so nothing surprises you.

  • 0.02 credits per connected minute. The meter runs only while your phone is connected to your project. An hour connected is 1.2 credits. The agent's own work is charged as usual, the same as in the editor. If your credits run out, the phone disconnects and the chat says so; after you add credits it reconnects by itself.
  • Android only. There is no iPhone version of the phone install. On an iPhone, use Scan to preview for the web version in the browser.
  • The chat has no microphone, no photos and no shake to open. You type your requests. The tab on the edge is the way in.
  • The web preview pauses while the phone build runs. It comes back when the build is done.
  • Live updates last for a working session. Your project's builder stays awake for your phone while it is connected, for up to about 4 hours after you last pressed Install on my Android phone. After that, or after a long break, the app keeps its last version, and the chat shows Offline and holds your messages. Press Install on my Android phone again to start a new session.
  • Fair-use limits on builds. One phone build per person at a time, a short break of about 2 minutes between builds, and 10 builds a day. One phone per project can be connected at a time.
  • It is a test build. The app on your phone is a debug build, made for live updates. Flutter's own docs note that debug builds can feel janky and that release builds are the ones optimized for speed. The version you publish is a release build, so judge layout and flow on the phone, not smoothness.

When the app is ready for other people, the Google Play path in Export builds the store file. Our guide on how to publish an AI-built app to Google Play walks through the store side.

How do Replit, Rork, Bolt, FlutterFlow and Lovable preview on a phone?

As of November 2026, AI builders that make React Native apps, including Replit, Bolt and Rork for its React Native projects, put them on a phone through Expo Go, a ready-made app that loads your project when you scan a code. Rork's native Android apps run in a cloud emulator or install as an APK. FlutterFlow, which also builds Flutter apps, uses a web version or its desktop app. Facts below come from each tool's own docs.

Tool How you see your app on a phone Phones
GrowApps Your real app installed by QR, with live updates and a chat inside it Android
Replit Expo Go, scan a QR code in the preview pane iPhone and Android
Rork Expo Go for React Native projects; native Android apps in a cloud emulator or as an APK; Rork Max installs on iPhone from a Mac iPhone and Android
Bolt Expo Go, scan a QR code from Device Preview iPhone and Android
FlutterFlow Test Mode web version by QR; Local Run from the desktop app Any phone; devices you connect
Lovable The web app in the phone's browser Any phone

Expo Go is quick and works on iPhone as well as Android, which our phone install does not. Expo itself calls Expo Go a playground that is limited for production-grade projects, and Replit lists features Expo Go cannot test, such as push notifications and in-app purchases. Replit and Lovable both let you chat with their agent from your phone through their own apps, which is handy for any project. GrowApps fits when you want to hold your real Android app, change it from inside the app itself, and ship the same project to the web, Android and iPhone. For a wider look, see our comparison of AI app builders.

Try it on your next change

Open a project at growapps.ai, press Export, open the Google Play row, then press Install on my Android phone, and scan the code. Then put your computer away, open the tab on the edge of your app, and ask for one change you have wanted for a while.

Frequently asked questions

How do I test an AI-built app on my phone?

In GrowApps, press Export, open the Google Play row, then press Install on my Android phone, and scan the QR code. Your real app installs on your Android phone and updates as the agent builds. For a web version on any phone, including an iPhone, use Scan to preview.

Can I change my app from my phone without opening GrowApps?

Yes. Tap the glass tab on the right edge of the installed app to open a chat with the agent, write your change, and watch the app update in your hand. You can also answer the agent's questions there.

Does the phone install work on iPhone?

No. As of November 2026 it is Android only. On an iPhone you can open the web version with Scan to preview, or build an iPhone app file from the App Store row in Export.

How much does it cost to keep my phone connected?

0.02 credits for each minute your phone is connected to your project, so 1.2 credits an hour. Nothing is charged while it is disconnected. The agent's work costs credits as usual.

Do I need a USB cable, adb or developer mode?

No. You scan a code, allow the install, and open the app. The app connects to your project over the internet by itself.

Is the app on my phone the one I publish?

No. It is a debug build made for live updates while you build. Publishing makes a separate release build of the same project for Google Play or the web.

Sources and further reading