Yes, you can run the app you are building on an Android emulator inside your browser. In GrowApps, open the Android tab at the top of the preview and press Run on Android. After a few minutes a virtual Android phone appears in the tab with your app on it, and you use it with your mouse and keyboard: tap, swipe, type, rotate, press Back and Home. There is no Android Studio to install and no phone to plug in.

GrowApps is an AI app builder that writes real Flutter apps for the web, Android and iPhone from one project, with an agent that writes, runs and fixes the code. This guide covers the Android phone in the browser as of November 2026: the steps, the buttons, how long a session lasts, what it costs, its honest limits, and how Replit, Rork, FlutterFlow and Appetize show an app on Android in a browser.

Why use an Android emulator in the browser?

The usual way to see an app on Android without a phone is the emulator in Android Studio. It works well, but it runs on your own computer. Google's guide to the Android Emulator recommends at least 16 GB of RAM and 16 GB of disk space, and you still create a virtual device and build the app yourself.

In GrowApps the phone runs on a computer in the cloud, and you watch and control it from a browser tab. Your laptop only shows the picture and sends your clicks.

It also shows something the web preview cannot. The Web tab runs the web version of your app. The Android tab runs the Android build of the same project, on Android. That is where you see the Android back button, the on-screen keyboard and the way the app opens from the home screen.

How do I run my app on Android in the browser?

You need GrowApps open on a computer and a project with a first version on screen.

  1. Open the Android tab. At the top of the preview pane, next to Web, there is an Android tab. Its hint reads "See this app on an Android phone". It appears once the first version of your app is showing.
  2. Press Run on Android. The tab says "This starts a virtual phone. It takes a few minutes." Press Run on Android.
  3. Wait for the three steps. The pane shows "Starting your Android phone. Step 1 of 3." and moves through "Starting the phone.", "Building your app for Android." and "Opening your app on the phone." This takes a few minutes. Press Cancel if you change your mind.
  4. Use your app. The phone appears in the pane with your app open. Above it, a countdown shows the time left in the session, and Stop ends it.

To go back to the website version, press the Web tab. The web preview stays where you left it.

What can I do on the virtual phone?

Your mouse is your finger. Click to tap, and drag to swipe or scroll. A row of buttons beside the phone does the rest:

  • Power, Volume up and Volume down, like the keys on the side of a phone.
  • Back, Home and Recent apps, Android's three navigation buttons.
  • Rotate, to turn the phone sideways and check your layout in landscape.
  • Screenshot, to capture what is on the screen.
  • Type with your keyboard, so you can fill in forms with your computer's keyboard instead of clicking the on-screen one.

The phone is a virtual Android 12L device. It runs a debug build of your app, the kind made for testing, so judge layout and flow there and not smoothness. Flutter's own docs explain that debug builds can feel janky compared with the release build you publish.

Here is a typical check. You built a small habit tracker. On the Android phone you add a habit, and the keyboard covers the Save button. You press Back and the app closes instead of going back one screen. You rotate the phone and the list overflows. Now you know three things to ask the agent for, in plain words, in the chat next to the preview.

Does the virtual phone follow the agent's changes?

While the virtual phone is open, the agent sends its hot reloads and restarts to it, the same way it does for the web preview, so it should show your newest changes. If it ever looks out of date, press Stop, wait a minute, and press Run on Android again. The new session builds your app as it is now.

If you want an Android app that stays on a phone in your hand, install it on your own phone instead. In Export, press Install on my Android phone and scan the code. That app hot reloads as the agent builds, and it has a chat tab inside it so you can ask for changes from the phone. Our guide on testing your AI-built app on your Android phone walks through it.

A simple rule: the virtual phone is for a quick check from your desk when no Android phone is at hand. Your own phone is for living with the app while you build.

What does it cost, and how long does a session last?

Here is the full picture, so nothing surprises you.

  • 0.02 credits per started minute. The meter runs while the phone is up and ready, about 1.2 credits an hour. A full 20 minute session is 0.4 credits. The agent's own work is charged as usual. To start, you need enough credits for at least one minute.
  • A session ends after 20 minutes. The pane then says "This Android session ended after 20 minutes. Start again when you are ready." Press Start again for a new session.
  • Or after 5 minutes without use. Leaving the Android tab or switching to another browser tab counts as not using it. The pane says "This Android session ended after 5 minutes without use."
  • One phone per person. If one is open in another project, you see "You already have an Android phone open on another app. Stop it first."
  • A short break between starts. Starting again right away shows "Wait a minute before starting the Android phone again."
  • Capacity is small. When every phone is busy, you see "No Android capacity right now. Nothing was charged. Try again in a few minutes."
  • Computer only. The Android tab does not appear on a phone-sized screen. On your phone, install the real app with Install on my Android phone instead.
  • No sound. The virtual phone plays no audio, so check sound on a real phone.
  • The phone can move. Now and then the phone has to move to another machine. A note says "Moving your phone..." and then "Moved. Your app is up to date."

How do Replit, Rork, FlutterFlow and Appetize show an app on Android in a browser?

As of November 2026, several tools run Android in a browser tab. Facts below come from each tool's own docs.

Tool Android in the browser Notes from its docs
GrowApps Android tab, Run on Android Flutter app; your own phone with live updates is the other path
Replit Android Emulator in the Preview device selector Streams from the cloud; Agent changes hot-reload; Core, Pro and Enterprise plans
Rork Cloud Android emulator for its Kotlin apps Billed per minute while it runs; APK download for your phone
FlutterFlow Test Mode runs a web version Local Run in the desktop app on an emulator or device you set up
Appetize Runs iOS and Android apps in the browser You upload an app file you built
Android Studio Not in a browser The emulator runs on your own computer

Replit and Rork both run Android in the browser too, and both also offer an iPhone simulator, which GrowApps does not. Replit's docs say Agent changes hot-reload in its emulator, and Rork's docs say you tap through the real app while you build. Appetize fits when you already have a built app file and want to run it in a browser. GrowApps fits when you want one Flutter project for the web, Android and iPhone, with a virtual Android phone at your desk and your own phone in your hand. For a wider look, see our comparison of AI app builders.

Try it on your next app

Open a project at growapps.ai, wait for the first version, then open the Android tab and press Run on Android. While it starts, think of one flow to test end to end, such as signing up or adding a first item, and walk through it on the phone with Back and Rotate. For the bigger picture of taking one project to Android and iPhone, read our guide to building a mobile app for iOS and Android.

Frequently asked questions

Can I run an Android emulator in my browser without installing Android Studio?

Yes. In GrowApps, open the Android tab of your project and press Run on Android. A virtual Android phone starts in the cloud and appears in the tab after a few minutes. You control it with your mouse and keyboard.

How much does the Android emulator in GrowApps cost?

0.02 credits for each started minute while the phone is up, so about 1.2 credits an hour. A session lasts at most 20 minutes, which is 0.4 credits.

Does GrowApps have an iPhone simulator?

No. As of November 2026 the phone in the browser is Android only. The web preview has a device picker with iPhone sizes, and Export can build an iPhone app file that you install on your own iPhone.

Why did my Android session end?

A session ends 20 minutes after the phone is ready, or sooner after 5 minutes without use. Leaving the Android tab counts as not using it. Press Start again to open a new one.

Can I use the Android emulator from my phone?

No. The Android tab does not appear on a phone-sized screen. On an Android phone, use Install on my Android phone in Export to put the real app on the phone itself.

Is the virtual phone the same as installing the app on my phone?

Both run the Android build of your project. The virtual phone is for a quick check from your desk, and a session ends after 20 minutes. The app installed on your own phone keeps updating as the agent builds and has a chat inside it.

Sources and further reading